220V AC Dual-Ply Custom Silicone Heater For Snowboard Press
Specification
This product mainly consists of alloy electric heating wires and silicone rubber high temperature insulating cloth,it generates heat rapidly with even temperature,high heat efficiency &good toughness,it conforms to American UL94-V0 grade flammability standard, it is easy to use,safe and water-proof,the aging life can be as long as 5 years.
Technical Parameters
1) The maximum temperature resistance of the insulating material:250°C
2) Highest service temperature:250°C-300°C
3) Insulating resistance:≥5MΩ
4) Compressive strength:1500v/5s
5) Power deviation rate:±8%
6) High voltage resistance:>5KV
7) Maximum 1000mm×8000mm minimum 20mm×20mm thickness1.5mm (thinness 0.8mm,thickness 4mm)lead wire length: Standard 200mm, in case that the above dimensions are exceeded, please contact with our company.
Features
1) Designed according to actual shape and dimensions, including three-dimensional
geometry to meet the requirement of your equipment
2) Moisture-proof and non-slip silicone rubber material offers longer working life of heaters
3) Simply sticking to your components through sulfuration, adhesive or fixer
Silicone Engine Heater detail :
| | | | |
Continuous use temperature | ≤200℃ | ≤180℃ | ≤150℃ |
Maximum operating temperature | 250℃ | 250℃ | 150℃ |
| | | 1200x5000mm | 500x1200mm | 1000x1000mm |
| | 10x10mm | 10x10mm | 10x10mm |
| | 0.8-3.0mm(Can be thickened) | 0.16-0.4mm(Can be thickened) | 0.6-3.0mm(Can be thickened) |
| | ≤2W/cm2(Meet rapid temp rising requirements) |
| | Alloy etching heating film/Ni-Cr heating wire | Alloy etching heating film | Alloy etching heating film |
| | Suitable for most heating situations | Suitable for heating in limited installation spaces | Suitable for impact- |
Flexible Heaters and Thermal Insulation Products are flexible in design and application to fit your specific needs. Chromalox provides dedicated engineering support to customize our Flexible heaters per your requirements. Most size, shape or contour can be used to apply direct and efficient heat without sacrificing dependability.
Various insulating materials are available to suit your application environment. Temperature controlling devices can be molded directly to the elements to provide precise system operation. Power requirements can be minimized and heat-up time optimized by applying heat directly to the part. Cool-down time is shortened and distributed wattages or multiple heater circuit designs are possible with our flexible heating elements.
Product Tags:
|
|
Dual Ply 250C-300C Custom Silicone Heater Snowboard Press 220V AC Images
|
